Don Nance Method of Making
ORMUS and White Powder Gold
Don Nance's Story as published by the Art Of Well-Being magazine,
summer 2001 issue My name is Don Nance. Five years ago I was living
in Richmond, VA with my older brother Tom. I came home from a
business meeting to find him lying on the floor in a pool of blood.
I dialed 911. He had been a plane captain on an aircraft carrier
during the end of the Vietnam war. There, he contracted Hepatitis-C
and it had been eating away at his liver ever since. This liver
dysfunction had caused constriction of the blood vessels along his
esophagus and they had ruptured. A doctor at the ER was barely able
to save him.
A few months later this reoccurred. After a lengthy hospital
stay, where they had run every test known to them, they had
concluded that his liver had been so badly damaged that they had to
put him on a waiting list for a transplant. His skin was badly
jaundiced. He had lost a tremendous amount of weight and his liver
was no longer capable of taking part in making the blood that he
needed. His blood count (specifically H & H) would fall down to 3
(should be 16) every two or three months and I would have to carry
him, literally, into hospital for infusions.
During this period of time, I felt my own strength and energy
wither. I thought that this was due to the stress of the situation
with Tom. But, I kept getting worse. I came down to Greensboro to
see a friend who was an Iridologist named Peter Seiler. He made it
clear that I needed to see a colon specialist. He even told me
exactly where the 'problem' was.
I consulted a specialist in Richmond. After arthroscopic
procedures and many other tests the medical professionals concluded
that I had advanced colon cancer and that I needed immediate
surgery. My condition was worsening daily and then my kidneys
decided to fail. A few days in the hospital and I was back home
again. I had made the decision not to let them perform a major
resection. I had decided to follow a different path.
I had previously been given a video tape of a gentleman named
David Hudson. He had made a discovery that I would soon learn dated
back thousands of years. In fact, predated recorded history. My
condition had now become desperate. Tom's insurance had long since
cancelled on him. We had gone through his savings and now mine.
Neither of us were able to get out of bed for any length of time,
let alone work. This was a dark time.
I was able to contact some people who had the material that David
Hudson had discovered. They sent it to Tom and I and we began
ingesting this elixir at a rate of 2 teaspoons per day.
Mr. Hudson had been researching a material that was a by-product
of his hobby. A gold mining operation in Arizona. He was a
millionaire and didn't mind investing his money in discovering what
this white powder was that was interfering with his gold recovery.
12 Years later, he had discovered that this material was gold,
rhodium and iridium in a monatomic form. That is, it was not
metal-bonded. This was the singular, atomic, true elemental form of
these materials. He discovered that this was the case for all of the
platinum-group elements on the periodic table. That the beautiful
but rare, shiny metallic gold was actually a fallen, low energy
state of the monatomic form. He further discovered that these
elements are abundant in nature. They are in aloe vera, carrots,
watercress, grapes and grape seeds, and also that a full 5% of pig
and calf brain ashes are made up of this material. He also
discovered that these elements are in every living thing and
everything that has ever been alive.
The plot thickened when some physicists that he had hired
discovered that these elements are room temperature superconductors.
Simultaneously, the U.S. Government (Naval Research Lab) discovered
that our bodies literally communicate on a cellular level through a
quantum resonance phenomena and this could only be accomplished if
there were body temperature superconductors in every cell of our
bodies. This is all still quite unknown to the professional medical
Now, just to make matters interesting, a friend of Mr. Hudson
handed him a book on Alchemy. He refused it but changed his mind
when he was told that it referenced a "white powder of gold." During
his subsequent research he made discoveries which led him to trace
the writings of the Bible, ancient Egypt, esoteric writings of
ancient philosophers and learned men. The references that he found
pointed to this material being the most ancient medicine. It had
been called "The Golden Tear From the Eye of Horus" by the
Egyptians, also "The Food of the Gods." The Hebrews called it the
Manna, which translates into "What then is it?"
References to this are well documented within the Dead Sea
scrolls, specifically, The Papyrus of Ani as translated by Budge,
the curator of the British Museum of Archaeology. This then, was
only a new discovery to our modern science. The Alchemists have
called it The Philosopher's Stone. Its attributes are well
documented in the Alchemical texts. It cures and perfects the Body,
Mind and Spirit. It is how our cells communicate with each other,
with our DNA and how our Energy Bodies are fed. This material is the
food for our Energy/light bodies. The link between our physicality
and our consciousness. We have been without this natural form of
nourishment for centuries now.
We had been ingesting this material, called M-3, which contained
70% rhodium, 15 % iridium and 15% gold, in the monatomic form, now
for several months. Tom was slowly getting stronger and had not
needed a blood infusion now for 4 months. A good sign. I had not
been feeling any effects from it until one day, after exactly two
months of ingestion, I woke up from my sleep and literally felt ten
years younger. I got out of bed that day and have been out of it
ever since. After three months of ingestion I was feeling great, as
if I had never been ill. My fatigue syndrome was gone and had noted
several other parts of my being changing. Tom had regained his skin
color, his energy, and it was now 5 months since he had needed
blood. A sure sign of greatly improved liver function!
We consumed this material for a total of 4 months. It has now
been 2 years since Tom has needed blood. His skin tone is normal and
he is now working full time. He is a carpenter. The doctors ran the
same tests on me again and they came back normal. No cancer. I feel
fine. In fact, better that I did when I was 30. I am 45 years old
now. When I was ill, I looked to be in my 70's.
The Spiritual effects of the Manna were subtle at first. A more
pronounced desire to do the right thing. An increased intuitive
ability and pronounced sessions of astral projection, an a "space"
which greatly enhances meditations and prayer, to name just a few.
These are, however, beyond the scope of this introductory article.
Shortly after I had completed my ingestion of the Manna. I was
invited to learn to make it. These people are very secretive and
extremely generous. I have now mastered the art of making the Manna
by several methods and from many sources. I make it from ocean
water, Great Salt Lake water, Dead Sea water, from minerals and from
the black sand that is assayed to contain 70% rhodium, 15% iridium
and 15% gold. My teachers asked only one thing of me. To teach those
who would learn to make this.
I have now taught dozens of people and am hosting workshops in
the Greensboro area. It has been a pleasure to do this. This is the
path that life has led me to. This is where I place my feet. Getting
sick and nearly dying was the best thing that ever happened to me!
They have asked me to teach. I smile. This was not much to ask.
These people literally gave me new life.
I thank them... and I thank you for listening. Love, joy and
HOW TO MAKE WHITE GOLD POWDER By Don Nance
Date: Thu, 27 Jun 2002 23:16:14 EDT Subject: HOW TO MAKE WHITE
GOLD POWDER #1
I am don from oceanalchemy.com
So, from the emails that I receive I guess that you wish to make
your own white powder of gold. Is this true?
Okay, then...lets do it.
***SOME OF THESE PROCESSES ARE DANGEROUS AND THE DANGER FACTOR
VARIES FROM ONE PART OF THE PROCESS TO ANOTHER***ALSO USE THE SIZE
FLASK INDICATED WITHIN THE TEXT***some common sense would indicate
to just buy from an Alchemist, but you don't want to hear that ;-)
Further realize that this is not a method to the Classical
Philosopher's Stone (neither was David Hudson's) nor to the Red
Lion. But this process will take you directly to the White Powder of
Get what ever quantity of pure (at least 99.99% pure) gold that
you can afford. I will list the process as a step-by-step METHOD
that does not include an Alchemist...for that benefit, you are on
The length of this process is such that you will need to first
and foremost be patient, as I have to eat and have bills to pay like
many of you here. If you cannot afford to buy at least 1/4 ounce of
gold, then please reply ASAP and I will tell you how to get around
that...but this holds a price tag in my efforts, your efforts and
the outcome of All efforts. Better to snag some of the yellow stuff.
As luck would have it the moon phase is just right for the first
steps. We want to make the gold go away, just as the moon is.
For every 1/4 ounce of gold, either powder or leaf it. This I do,
as I buy it in shot form, by setting a blow torch to it and melting
it all into one big nugget. Then, while it is still hot I beat hell
out of it with a hammer into the shape of a thin coin, then I file
it with a new Mill Bastard file into powder which I put into my 2
liter lab glass filtering flask for the initial dissolution. The
gold is soft and does not leach anything from the very hard steels
used. No matter what anyOne may say, I have assays which tell me
that this is the preferred Way, just as the Ancients accomplished
it, except that we have purer gold than they had. There are no
contaminants from this method. If you don't believe, then I am
wasting my time...and yours...go get an education!
I now have 1/4 ounce of pure gold in my 2 liter flask. To this I
will add 6 ounces of distilled water. Into this water I will add 3
teaspoons of salt. I will stir this until it is dissolved. AFTER the
salt is dissolved, I will add pure HCL, the ACS is 35% and I will
add 8 ounces of it. I will then add the Celestial Fire. (you are
creating approximately a 20% acid solution of HCL)
Once all of this is happy, One may expect some reaction from the
HCL, but there is none. The Au (gold) just sits there, and it will
do so indefinitely. At this point, we begin to kindle a fire...but
not the kind of fire that you are accustomed to lighting ;-)
Take 1 ounce of 35% Food Grade H2O2, yes, that's hydrogen
peroxide, and add it to your flask. The reaction will take about 20
minutes to begin, depending upon ambient temperature. You may or may
not need to add more FIRE (H2O2) to the mix, this depends upon the
particle size of your gold, which ALWAYS VARIES..What you want to
see is a steady stream of bubbles rising from all of your gold. The
temperature within the flask may elevate somewhat, and it will
definitely give off NOXIOUS CHLORINE GAS which must be vented,
somehow, without allowing the ORMUS to escape... If you cannot
figure out how to accomplish this task, then, trust me, you do not
want to do this procedure. If you don't trust me, then...WHY are you
You will continue to add H2O2 by the 1/2 ounce, to keep the fire
going. I personally believe that this "cold reaction" is soliciting
energy from the Zero point or from the Ether to disaggregate the
gold, as this method defies rational mathematics. You will always
have to watch your fire, as any Alchemist would, to keep it fueled
and fired, or your gold will take forever to go away if you do not.
IF you try to go too fast, you will have a real mess on your hands
as the ACID BOILS OVER ONTO EVERYTHING and ruins your wildest hopes.
Be patient here, please.
This takes time, as every Chemist hates, you do not dissolve gold
for Aurum Potable overnight. Give it up. The click of the clock is
but a contrivance of Mankind to keep his Like enslaved and
controlled. The real time is that time which it takes...that time
which IS, that time which comes around to you...the Patient One.
Once seven people have replied stating that they are at this
point, then I will again Serve. I will also ask that those Seven
will not be anonymous, as I am not, and that they will be at service
to those in need. That they will be Responsible to aid with the
helping of others. They will be responsible for their actions. I
will then follow with next processes. But not until. If you do not
agree, then go buy some dognuts and shut up.
Sincerely...I have answered your call...this thing I Will Do...
As Above ~ So Below
don nance swiftrock@... www.oceanalchemy.com
Date: Sat, 13 Jul 2002 12:58:50 EDT Subject: HOW TO MAKE WHITE
GOLD POWDER #1 Outline steps 1 ~ 9
To dissolve 1/10 ounce of gold, I use the following recipe,
1) Into a 500 ml. flask I place 60 ml. of distilled water.
2) I stir in 1 teaspoon of pure salt. Good to use Morton canning
and pickling salt. Be CERTAIN that all of the salt is dissolved and
the solution is clear of particulates. This is important. Don't use
iodized salt and do not use a salt with anti-caking chemicals in it.
Use pure NaCl.
3) Add your gold filings.
4) Stir in, VERY SLOWLY, 80 ml. of muriatic acid. I use ACS
quality, but Buckman's Laboratories makes a very pure muriatic,
which is available from quality pool/spa dealers. Smart brand also
works. The muriatic must be clear/colorless, as the yellow stuff
contains sulfur and will NOT work. The acid must be added VERY
slowly. If you go too fast, the salt will precipitate back out of
your solution. This will work, but seriously slows down the
dissolution of your gold. When this happens, the salt will slowly go
back into solution as your gold dissolves. So if this occurs, just
go on with the recipe, realizing that it slowed you down
5) add in some 35% H2O2 (hydrogen peroxide) food grade or
technical grade (minimum). Add it about 1 teaspoon at a time and
wait 20 minutes. A "fire" will begin inside of your flask. You want
to have a good steady stream of bubbles coming from all of your
gold. You also want to build your fire slowly. If you add too much
H2O2 you run the risk of having it boil on you and it will come out
of your flask and the gassing will be extreme and acid will go
everywhere and life on our planet, as we know it, will have changed
6) Place this inside of a shield (nest) and check it three times
a day. Add H2O2 as needed until your gold goes away. This takes as
long as it takes. The Philosophers had many ways of marking time.
The two that we are concerned with here are the lunar phases and the
"elastic" time, that which is marked by a reaction taking as long as
it takes. The variable being that you will never have exactly the
same particle size for your gold and the phase of the moon. Best to
do your dissolution during the waning moon and precipitations during
the waxing, culminating during the full moon. Believe it or not,
this really makes a difference.
7) Once all of your gold is dissolved, add more H2O2 and keep the
fire going for a while longer. This will help to break up the
Once this is complete, you will have a very pretty gold chloride.
Its ph will be MINUS 2.0 (on my well calibrated meter). It will eat
you to the bone. Always wear protection for eyes, hands,
etc...anything that you could not stand to lose :)
From here there are several "ways to go." The most direct way to
white gold is to make up a lye menstruum of about 1 part lye to 8
parts water. This is about 18 oz. of lye crystals slowly dissolved
into a gallon of distilled water. This reaction creates heat and
some nasty fumes and needs to be done in a glass jar or beaker. The
lye, just like the acids, are always added to the water. NEVER add
water to concentrated lye or to concentrated acid. You will have a
8) Once your gold solution has stopped bubbling from the H2O2,
begin dripping your 1/8 lye menstruum into it at a rate of about 4
drops per second while stirring briskly. You ARE wearing gloves and
eye protection, aren't you? You really don't need a ph meter for
this. Just bring the ph up but not too quickly! Too fast and it will
boil on you...if you see some steam collecting on the sides of your
flask, you are getting too hot. Slow down your lye addition and keep
stirring. This reaction takes a WHILE.
Your solution will clear, you can stop and rest here. If you are
going too fast, the solution will clear and then very quickly change
color and a precipitate will form. That's fine, no worries.
Stop adding lye when you get a precipitate, this will occur by ph
10.78 if you are using a meter. If no meter, stop when you get a
color change and a precipitate.
While you are resting, mix up an acid solution in a glass jar by
adding 4 parts of muriatic acid to 3 parts of distilled water.
9) Start stirring your gold solution and slowly drip in some of
this acid solution. This acid solution should approximate a 20%
strength. Stop adding acid solution when your gold precipitate
disappears. The ph will be around ph 1 or so. The color of the
solution will likely be gold but not as concentrated looking as
before. It may also be another color. No worries again, just look at
it to see that there are no particles. If so, add more acid
solution. If you still have particles, stop there and add some more
H2O2 just as before and break this stuff up some more.
Date: Sat, 13 Jul 2002 13:53:00 EDT Subject: HOW TO MAKE WHITE
GOLD POWDER steps 9 ~
Continued from step #9....
10) Begin stirring your gold acid solution and start dropping in
your LYE menstruum to again raise the ph of your solution. You want
to go on up to ph 10.78 again or until you get a precipitate. Don't
be surprised if this is yet a different color from the last time you
11) Now bring the ph back down into acid using your 20% HCL
solution that you likely made from muriatic acid. This time, when
the particles disappear, the solution will no longer be gold colored
at all. This is your clue that the metal bonds are broken up
sufficiently to proceed.
12) Now, LOL! Bring the ph of your solution up to about ph 8.0 or
so by stirring quickly and adding your lye menstruum in drops.
What we are doing with all of these ph swings is breaking the
metallic bonds of your gold metal.
Now what you have is three things from your gold. Although this
is not readily apparent! The precipitate that is falling is made up
of the larger metallic clusters. It is gold oxide. It is still
metal. However, in your solution, is the oil of gold, chlorides and
consciousness (m-state). To make a Stone One would do a different
process at this point. However, we are concerned with getting to the
white powder/elixir stage. So we do this...
Instead of separating the various Philosophical components, we
will "marry" them. Many of the superfluous impurities went away with
that nasty chlorine gas. If you wish to complicate your life, you
can do this...
12a) let the precipitate settle well, then pour off the top water
and KEEP it, (You can evaporate this down, very slowly, and obtain a
white powder of gold trichloride which is VERY POTENT) and wash the
precipitate with 3 times as much distilled water as you have
precipitate by volume. This is done by simply adding the Universal
Solvent (distilled water) to your separated precipitate and
stirring. You let this settle and pour it off (I eat it :) then add
the original top water back into the precipitate...then proceed to
the next step...or you can skip all of step 12a and just jump right
13) Place the precipitate and top water into a boiling flask and
over a gas flame or candle, slowly evaporate the water from your
precipitate. My advise is to not boil this and go to a just-dry
state. This, again, takes as long as it takes. Do not boil it and do
not bake the dryness or scorch it. You want it just thoroughly dry.
The addition of the gentle heat will help the oils reunite with the
precipitate. Boiling it will drive off m-state.
14) Once it is thoroughly dry, you will need to large boiling
pot. I use a Visions glass/ceramic dutch oven in 5 quart size WITH
LID. Boiling won't drive off so much of the m-state now that the
oils are reunited with the precipitate. Take it out of doors, on a
moonlit night, before the full moon, and place your dry precipitate
inside of it. In a separate glass jar, add 18 ounces of lye slowly
into 1 gallon of distilled water. This causes heat and must be
thoroughly stirred in until it clears. Don't breathe the vapors.
15) Stir this now clear lye menstruum into your boiling pot with
your precipitate sitting there.
16) Bring this to a full rolling boil and reduce the heat, while
stirring, then cover tightly and place a brick or some other
inflammable weight on the lid to reduce steam losses. THIS BOILING
LYE IS VERY VERY VERY DANGEROUS!!! Let it boil, at a gentle rolling
boil, for at least 4 hours.
17) When done, add some distilled water to bring the level back
up to one gallon. Let it cool and settle.
18) Filter your solution through unbleached filters until it is
clear of any particulates. I use a 1 micron filtering system.
19) While stirring your filtered solution rapidly, drip in some
of your 20% HCL solution (acid solution) to reduce the ph to around
If you want to get fancy, go down slowly (all of this step is
done SLOWLY) to below 2 ph and then add some of your 1/8 lye
menstruum to bring the ph back up to 7.8 ph.
20) Let your white precipitate settle and separate the top water
from it and save the top water.
21) Wash the precipitate as before in distilled water. Let it
settle and separate. Save this top water.
At this point you can marry the top water to the precipitate by
evaporation, as before, or you can simply dry the white, saltless
precipitate and anneal it or you can measure it into water and have
I would not wash all of the salt out of it. Annealing is up to
If you do not get a white precipitate from step 19 it either was
not dry enough before the boil or the clusters were not sufficiently
broken up enough. This is often witnessed by a color and precipitate
forming when you first add your lye water in step 15. If this
happens, precipitate it back out of solution by going to ph 8 with
an acid solution, then dry it and redissolve as if you were starting
from the beginning with gold metal (step 1). If you get to white
gold during the ph swings, simply bring the ph to about 7.8 and wash
some of the excess salt out. It is about "there." What you do with
the oils which are in your wash and precipitation water is up to
There are other ways to do this. This is only one method of
Have fun! Be SAFE! Wear protective clothing.
Date: Sat, 13 Jul 2002 12:20:11 EDT Subject: WhiteGold: HOW TO
MAKE WHITE GOLD POWDER ~ Basics
Hello again :)
Have been away for a while, someOne testing our patients, eh?
Must be the Powers That Be!
HOW to find gold to make it with....
Simply go to a coin shop! DO NOT buy a Krugerrand for this work,
because they and many other coins contain 9999% gold but this is the
pure gold CONTENT, they also contain other metals to harden them.
What you want to do is ask for PURE TRADE GOLD COINS, 9999, WITH
NO FILLERS. A Liberty trade coin, in 1/10 ounce size, should cost
about $40.00. Use this. If they don't have it, have them order for
you. These also come in 1/4 oz., 1/2 oz., and 1 oz. weights. If in
doubt, talk to the dealer and tell them that you want only pure
gold. The trade coins have no intrinsic collector value, they are
only worth the Market Value of gold on that day. Just like buying
bullion or nuggets. I don't use coins for my work, as I get my
certified gold direct from a refinery, but this is no matter, I
would use a Liberty Trade coin in a heartbeat.
As we talk about this Work I will explain to you how to spot
HOW to find food grade/technical grade Hydrogen Peroxide (H2O2)
Health food stores, many herb shops, H2O2forU.com...search the
HOW to prepare the gold...
You want to buy a Mill Bastard File. They are specifically
designed to file metals which are much harder than gold. I prepare
my file by washing it in soap and water with a med. tooth brush.
Then dry it thoroughly. File the coin down into your flask. Brush
the remaining gold from the slots on your file into your flask.
Store your file with a very light coating of pure olive oil.
HOW do we deal with the chlorine gasses?
My initial experiments with this found me using a borosilicate
glass beaker and I simply placed another jar over the top (mouth) of
it to recirculate the gasses, kind of like a makeshift Pelican. You
can also connect a tube from your flask and feed the gasses into the
bottom of another flask which is filled with olive oil or water with
a little lye in it. This will contain the gasses until you open your
gold flask to add more H2O2. Best to ventilate the area. The gasses
are VERY CORROSIVE and will damage your lungs. If you do this
outside, admit NO direct sunlight.
Shielding is needed...
I do my Work by placing my flask inside of a plastic bucket,
which is placed inside of a steel can which is placed inside of a
cardboard box. I line the steel can with saran wrap. If you don't,
the steel will not last very long ;-) The tubing going to your gas
containment flask needs to be long enough to accommodate this and
the containment flask need not be shielded.
NO metals other than your gold ever touches the solutions.
Period. Use glass, ceramics, etc.
I will next send a recipe which will accommodate 1/10 ounce of
gold and any multiple thereof. Simply multiply the quantities of
ingredients for the amount of gold that you are dissolving.
Love and abundance ~~