New - M.O.P.A. Master
Oscillator Power Amplifier 1930's to 1950's Equipment Replica with
Updated Advanced Technology Exceeds All Other Gas Tube Instruments.
The M.O.P.A. Amplifier (Master
Oscillator Power Amplifier) provides a variable 1.1 MHz to 1.9
MHz frequency oscillation with low frequency pulsation from the
GB4000 function generator. Is is a 1930-1950 M.O.P.A. replica.
When connected to the GB4000 it is capable of outputting 8
frequencies simultaneously.
The M.O.P.A. Master Oscillator Power Amplifier
is capable of the following:
Modern solid state equipment uses lower
voltage and high current output, but the M.O.P.A. is a high
voltage low current output. This is the same method used in
the 1930-1950 equipment
Its sine wave oscillator frequency range
covers 1.1 MHz to 1.9 MHz using a variable tuning capacitor
Average power is 50 watts. Peak power
when gated or modulated is 250 watts
Can output frequencies through a metal or
plasma tube antenna
Amplifier output is analog using the
original vacuum tube amplification
Allows input of GB4000 audio frequencies
up to 40,000 hertz
Allows any frequency from 1.1 MHz to 1.9
MHz to be used as a stand alone frequency or as a carrier
wave for square wave audio frequencies input from the
GB-4000
Any frequency from 1.1 MHz to 1.9 MHz can
be gated or pulsed using the GB-4000
Connects to the GB-4000 through regular
banana jacks or a BNC connection
Fabrication: Built by hand and tested for
quality assurance with one year warranty
Proven design: Solid state combined with
vacuum tube technology used for over 80 years
Amplification method: Original vacuum
tube amplification
Amplification voltage: High voltage (1160
volts)
Amplification current : Low current (30
to 140 milliamps)
Vacuum tube vs Solid state amplification:
Modern solid state uses low voltage and high current
designs. The M.O.P.A. uses the high voltage low current
design
Milliamp meter: Built in
Waveform: Sine wave
Sine wave: Analog
Carrier frequency: Variable
Carrier frequency range: Approximately
1.1 MHz to about 1.9 MHz.
Carrier frequency tuning: Variable tuning
capacitor
Power output: Variable average power with
a maximum of approximately 60 watts at 140 milliamps
Peak power: When gated or modulated,
approximately 250 watts on the high potential voltage rise
on the leading edge of the square wave waveform
Frequency input method: Designed to work
exclusively with the GB-4000 frequency generator through
banana jacks or a BNC connection
Frequency output modulation: GB-4000
audio frequencies up to 40,000 hertz square wave @ 100% AM
modulation
Maximum frequencies output: When
connected to the GB4000 it can transmit up to 8 frequencies
simultaneously
Gating or pulsing: 1 to 40,000 hertz
using the GB-4000
Frequency delivery: Metal or plasma tube
antenna (sold by another company)
Tube ignition: instantaneous with no SWR
meter needed
Broadcast range: 1700 feet with useful
range of about 30 feet when using plasma tube
Suggested range: 1 to 5 feet when using
plasma tube
Size: Compact design - 10.5" Wide X 17"
Long X 10" High
Power used: 110/120 volts AC
Power usage: 150 watts
Weight: 19 pounds
Please note: plasma tube including copper
collars with wire and plasma tube holder sold separately from
another company for $260.00 plus shipping. We will provide you
the phone number for that company so you can order it when you
order your M.O.P.A. This plasma tube is made of Pyrex and is a
2" inch round by 14" inch long helium filled tube. It is
guaranteed to handle the power output of the M.O.P.A.
We
recommend the purchase of an Elenco F-2800 Frequency Counter to
properly read your M.O.P.A. Frequency Amplifier. Since the
M.O.P.A. Oscillator/Amplifier uses an old style variable
capacitor it is necessary to have a frequency counter so you can
set the instrument to what ever frequency you wish to use from
1.1 MHz to 1.9 MHz.
Please note: Frequency counter not supplied with
the purchase of the M.O.P.A. Amplifier.
It can be purchased from All Spectrum
Electronics 1-877-899-7400 for around $99.00
M.O.P.A. Replica Vacuum Tube Amplifier/Oscillator for those
who already own a GB-4000 The M.O.P.A. Vacuum Tube
Oscillator/Amplifier is a custom order device made to order. Once we
receive your signed order/agreement, we will start building your replica
M.O.P.A. Amplifier and ship the completed unit in approximately 1 to 3
weeks. All units are built to order and you must sign an order/agreement
which waives our liability for any potential FCC or AM radio
interference issues. Download the MOPA Agreement
HERE. Gas
Tube NOT INCLUDED. Upon receipt of your order we can supply you with
several sources for tubes which typically cost in the $250 to $300 range.
$2595.00
M.O.P.A. Replica Vacuum Tube Amplifier/Oscillator with a GB-4000
Function Generator Special Combo Price
$4305.00
USA (48 contiguous states) USPS Priority
or FedEx Insured Shipping and Handling - FREE
FREE!
To purchase a GB-4000, SR-4, or M.O.P.A. using Visa,MasterCard or PayPal, click the button below:
or Call Toll Free: 1-800-435-1392
These instruments are sold as electronic test instruments.
No suitability, claims, or merchantability for any purpose is stated or implied. READ DISCLAIMER HERE
Since the M.O.P.A. is built by special order, there are no
returns accepted on this instrument.